Is your iPhone not charging anymore? There can be all sorts of causes that prevent the iPhone battery from charging. This tip offers five solutions if your iPhone has stopped charging.
Your iPhone Is Not Charging?
Has your iPhone stopped charging or have problems charging the iPhone battery? There can be all sorts of reasons. In this article, we offer you some solutions if your iPhone is no longer charging. If your iPhone no longer turns on, then something else may be the case. The solutions mentioned below will help you if your iPhone charger is not working.
Solutions If Your iPhone Has Stopped Charging
Check the charging cable
Sometimes the fault is not in the iPhone but the cable. Try connecting the iPhone to a different cable to see if there might be a wire break. Even Apple’s Lightning cables break down regularly.
If you get a message when connecting the iPhone or iPad that the cable is not approved, it may also stop your iPhone or iPad from charging. Some third-party cables are of poor quality. Since Apple has stricter quality controls and has a special chip installed in the cables for this, it is becoming increasingly common that cheap cables do not work.
If you are lucky, the charging will still work despite the message. Instead, buy a slightly more expensive cable with an MFi certificate, so that you are sure that Apple guarantees correct operation. If your iPhone won’t charge anymore, changing the cable is the right cheap solution.
Check the power supply
There may also be something wrong with the power adapter or with the socket. Connect the Lightning cable to a USB port on the computer to see if that resolves it.
Also, check if the power supply works. If you use a connector block with a switch, it may be that it is switched off. Have you checked the plug, but your iPhone is not charging yet? Then something else is wrong.
Check The USB Port
Some USB ports provide power, while others have low voltage to charge devices. Now an iPhone does not use that much energy, but if you connect an iPad Pro to the computer, it can take a long time before the battery is charged.
It may seem that the iPhone is not charging, but in reality, the battery is charging (very slowly). Some USB ports are only powerful enough to connect keyboards and other energy-efficient devices and are not intended to charge devices. Also, try connecting the charging cable directly to a USB port on the computer instead of a USB hub.
Calibrate The Battery
Sometimes the battery indicator is faulty. A deviation may occur along the way, making it seem like you can no longer charge the battery to 100%. Also, with other strange behavior of the battery indicator, it is smart to calibrate the battery. In the tip below, we explain how to do that.
Dust And Dirt In The Lightning Port
Dust can sometimes get trapped in the small connection port of the Lightning adapter, as a result of which the gold-colored pins of the cable do not connect properly. Consequence: the iPhone does not charge. Fortunately, it is possible to remove dust from the Lightning connection of your iPhone.
You only need a toothpick with which you can scrape the dust out of the connection port. Be very careful with this: you can inadvertently damage the connection points by applying too much pressure. It is therefore also recommended to use a wooden toothpick, which bends more quickly so that you do not damage any parts.
Another possibility to remove dust is the use of compressed air. By blowing enough air into the connector, dust can come loose, after which you can gently shake it out.
Two things are essential here: the nozzle used must be narrow enough to fit in the iPhone connection, and the air must also be able to escape again to prevent damage caused by increased pressure within the port.
If it is not possible to remove dust and dirt from the Lightning port, you can also have it done in the Apple Store. Compressed air is also used for this, but customer care personnel are trained to do this without damaging your iPhone. If you don’t dare to remove the dust yourself, a visit to the store can rarely hurt.
Bonus tip 1: Wireless charging
If your iPhone supports wireless charging, you can always use wireless charging to charge the battery. If your Lightning port seems broken and you don’t want to have it repaired, you can continue to use your iPhone.
You no longer need the Lightning port, because exchanging files can now be done wirelessly. It is not a definitive solution if your iPhone charging does not work, but you ensure that you can still provide it with power.
Bonus tip 2:
Be patient If the iPhone is completely drained out, it may take a while before you see something happen. The battery icon will only appear after a few minutes when the battery is slightly charged again. If you have the iPhone connected to a computer, make sure it is switched on and not in sleep mode.